SE 2.6-3.2-3.8 PLUS

Download PDF

Panel Saw SE2.6 PLUS – SE3.2 PLUS – SE3.8 PLUS

Max blade Ø 450mm.

Technical data

SE2.6 PLUS SE3.2 PLUS SE3.8 PLUS
Sliding table dimensions mm 2600×400 mm 3200×400 mm 3800×400
Table dimensions mm 650×1100 mm 650×1100 mm 650×1100
Squaring frame dimensions mm 640×1190 mm 640×1190 mm 640×1190
Saw blade bladeØ/holeØ mm 400/30 mm 400/30 mm 400/30
Cutting height with blade Ø 300 mm 90°/45° mm 80/58 mm 80/58 mm 80/58
Cutting height with blade Ø 400 mm 90°/45° mm 130/93 mm 130/93 mm 130/93
Cutting height with blade Ø 450 mm 90°/45° at lowest position the blade sticks out from the table of 25 mm mm 155/110 mm 155/110 mm 155/110
Scoring blade bladeØ/holeØ mm 120/20 mm 120/20 mm 120/20
Scoring blade speed rpm 7500 rpm 7500 rpm 7500
Scoring motor power HP 1 HP 1 HP 1
Cutting width on rip fence mm 1250 mm 1250 mm 1250
Saw blade speed rpm 2800/4000/5600 rpm 2800/4000/5600 rpm 2800/4000/5600
Saw blade motor power HP 7,5 HP 7,5 HP 7,5
Weight kg 730 kg 800 kg 840

STANDARD EQUIPMENT

  • Powered saw blade unit upstroke
  • Powered saw blade unit tilting with quota positioning
  • HM saw blade
  • Saw blade safety protection
  • Electronic digital readout for tilting
  • Table extension
  • Angular cutting device
  • Eccentric clamp
  • No. 2 dust extraction hoods (1 x ø 120mm, 1 x ø 60mm)
  • Manual delta/star switch on
  • Scoring unit with independent motor

CE EQUIPMENT

  • Powered saw blade unit upstroke
  • Powered saw blade unit tilting with quota positioning
  • HM saw blade
  • Hanging saw blade safety protection “CX 400”
  • Electronic digital readout for tilting
  • Table extension
  • Angular cutting device
  • Eccentric clamp
  • No. 2 dust extraction hoods (1 x ø 120mm, 1 x ø 80mm)
  • Start and stop of the main motor managed by inverter
  • Saw blade speed managed by inverter with selector 3 position on control panel
  • Scoring unit with independent motor

UPON REQUEST

Deduction for machine with manual rise & tilt by means of hand wheels located in frontal position

Deduction for CE configuration machine with saw blade max. Ø 315 mm

Deduction for CE configuration machine with 1 saw blade speed, sef-braking motor and manual delta/star switch on

Deduction for machine without scoring unit

Scoring unit with independent motor HP 1. Rise & translation movement on linear guides. Pneumatic cylinder on/off for the scoring unit. The scorer blade rise only when the motor is switched on.

Powered rip fence managed by 5’’ touch screen control panel V4C model with manual and fully automatic functions and possibility of incremental shifts: readout on encoder; automatic change of quota relative to the position of the fence, profile positioned high or low; automatic axis calibration; automatic recovery of the quota from cutting width and blade tilting. (with this option, lifting and tilting are also managed from the control panel)

8" touch screen control panel V8 model instead of 5" control panel V4C model (hanging control panel is compulsory)

Hanging control panel

Motor HP 10

Motor HP 12

Supplement for self-braking motor with brake release (standard configuration)

Hanging saw blade safety protection “CX 400” Suction hood Ø 80 mm (standard configuration)

Main motor managed by inverter Variable speed from 2500 to 5000 rpm (standard configuration)

Squaring frame with recovery of the quota reference for the squaring fence stops

Squaring fence with 3 electronic readout

Rip fence with electronic readout

Cutting width on rip fence 1500 mm

Double sided mitre fence

Double sided mitre fence with electronic digital display

ON/OFF switches on the sliding table (it is compulsory ‘’Automatic delta/star switch on’’ for configurations without main motor managed by inverter)

Automatic delta/star switch on

Small table for parallel cuts

Bar pneumatic presser for the whole length of the sliding table

Laser

2nd squaring frame for sliding table

Related products

Request a quote

Request a personalized quote for your needs, we will contact you within 48 H!